The Brighter Choice
JUPITER PRO is a high-performance multi-wattage high-bay with an adjustable beam angle.
The beam angle is adjusted by rotating the lens, so no extra components or attachments are required.
3 different beam angles can be achieved, 70°, 90° and 100°.
The wattage is selectable, with the options being 100W (16,271 lm), 150W (25,805 lm) and 200W (33,597 lm).
The efficiency is up to 178 l.
lm/c.
W.
JUPITER PRO can be fitted with a plug-in micro-wave or PIR sensor.
1-10V dimming is supplied as standard, but its use is optional.
If you choose not to use the 1-10V dimming option the fittings (and any sensors attached) operate in on/off mode.
Emergency versions can be created by the addition of a plug-in emergency kit), available in manual and self-test versions, avoiding the need for separate twinspots to be installed.
• Factories, workshops and warehouses
• Public areas such as airports and railway stations
• Mounting heights of 5m+
• Die-cast aluminium body painted black
• Adjustable polycarbonate lens. Rotating the lens gives a choice of 60°, 90° or 110° beam angles
• Power selectable. DIP switches allow selection of 90W, 150W or 200W
• Socket for a plug-in sensor (PIR or microwave). The sensor is optional and is purchased separately
• Driver with 1-10V input (use optional), compatible with the sensors listed. If no sensor is fitted the driver operates in fixed-output mode
• For suspended installation. Suspension eyelet supplied
Emergency conversion packs – two plug-in emergency conversion packs, each with its own light source and lithium (LiFePO4) batteries, are available as listed opposite. Both are non-maintained 3 hours, with a choice of manual test (NM3L) and self-test (STNM3L).
Plug-in sensors – available to be ordered as separate items. They have a 1-10V output, compatible with the driver fitted as standard. Two sensors are available, and a programming handset:
• Passive infrared (PIR), up to 12m mounting height
• Microwave (MW), up to 15m mounting height
• A programming handset is required to commission the sensors, listed opposite
Reflectors, refractors and brackets – available to be ordered as separate items:
• Polycarbonate refractor
• Aluminium reflector
• Stirrup mounting bracket
Dimming
• DA: DALI dimming
• CS: Casambi smart wireless control
• HS: HubSense smart wireless control